- Home
- Brand
- Focal Length
- Focus Type
- Mount
- As Describe (22)
- Canon Ef (22)
- Canon Rf (6)
- Contax / Yashica (7)
- E Mount (6)
- Fujifilm X (7)
- Keine Angabe (12)
- Leica L (6)
- Mamiya 645 (13)
- Mamiya M645 (4)
- Mamiya Rz (5)
- Mamiya Rz67 (3)
- Nikkor (5)
- Nikon F (60)
- Nikon Z (9)
- Olympus Om (9)
- Olympus Om-system (4)
- Om Mount (4)
- Pentax K (5)
- Sony E-mount (16)
- Other (336)
- Series
- Canon Ef (4)
- Canon Tilt Shift (16)
- Canon \ (3)
- Carl Zeiss Distagon (2)
- Laowa (2)
- Mamiya Rz67 M L Sb (2)
- Mamiya Sekor (15)
- Mamiya Sekor C (3)
- Mamiya Sekor Z (7)
- Nikon Micro Nikkor (3)
- Nikon Nikkor (33)
- Nikon Pc Nikkor (3)
- Nikon Pc-e Nikkor (2)
- Nikon Pc-nikkor (6)
- Olympus Om System (13)
- Olympus Zuiko (4)
- Panasonic Lumix (2)
- Pentax Smc (6)
- Ttartisan (3)
- Zeiss Distagon T* (3)
- Other (429)
- Type
- As Describe (26)
- Full Frame (7)
- High Quality, Prime (11)
- Lens Adapters (35)
- Perspective Control (26)
- Portrait, Prime (3)
- Prime (9)
- Sekor Shift (2)
- Shift (9)
- Shift Lens (4)
- Shift, Wide Angle (4)
- Standard (4)
- Sunglasses (15)
- Telephoto (6)
- Tilt Shift (3)
- Tilt Shift Lens (4)
- Tripod Mount Ring (3)
- Unit (4)
- Unknown (3)
- Wide Angle (52)
- Other (331)
CNC Tripod Ring for Canon TS-E 17mm f/4L and TS-E 24mm f/3.5L II Tilt-Shift Lens
CNC Aviation Aluminum Lens Collar Tripod Mount Ring IS-TS-E1724II for Canon TS-E 17mm f/4L Tilt-Shift Lens and Canon TS-E 24mm f/3.5L II Tilt-Shift Lens Bottom is ARCA Type Quick Release Plate Feature Compatible with Tripod Ball Head of ARCA-SWISS / PMG Fit. The tripod mount ring is made of high quality Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, lightweight and solid; surface polished and anodized finish, laser lettering; appearance and exquisite workmanship is much better than similar products made by mold; 2. The tripod collar is customized according to the lens. Accurate shape design, avoided the adjustment knob and the switch of the lens, will not affect the original functions of the lens; strong and sturdy; 3. Multiple rubber sheets are embedded on the contact surface of the lens collar and the lens to protect the lens from wear, the rubber is about 0.5mm higher than the contact surface; with stainless steel screw, net weight is about 195g; 4.
The bottom of the lens support is added Arca fit quick release plate, the length of the plate is about 46 mm. 1/4 and 3/8 screw holes, stainless steel anti-slip screws are reserved; 5.
This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK. Canon TS-E 17mm f/4L Tilt-Shift Lens Canon TS-E 24mm f/3.5L II Tilt-Shift Lens. 1 x iShoot Tripod Mount Ring IS-TS-E1724II. (The other items in the photos not listed here are for illustrating only, not included). Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX Compatible with RRS / Arca-Swiss Fit Quick Release Plate and Ball Head.
Improved second-generation clamp, made of aviation Aluminum material, CNC finely machined, surface oxidation treatment, round ultra-thin design; size without knob is around 64 x 15.5mm; coaxial knob to adjust clamp opening and closing; knob rod length is around 46mm; net weight around 115g; 3. Clamp with precision scale, built-in spirit level, with 3/8 screw hole, designed with two symmetrical 14 x 6.5mm hollowed function extension slots; 4. With Arca standard fit, cross slot design, compatible with ARCA-SWISS, KIRK, Wimberley, MARKINS, SUNWAYFOTO, kangrinpoche, BENRO, SIRUI quick release plate and ball head of Arca fit; can be used with iShoot panning head IS-QJ64II and quick release plate QS-60/QS-70/QS-80. 1 x Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX.